Vogelzang BK50E Manual de usuario descargar pdf (Pagina 4)

Page 4 / BK100E Vogelzang International Corp. VGZ-023 / 20120410.2

ASSEMBLY INSTRUCTIONS

tools required

CAUTION: STOVE IS HEAVY. MAKE SURE YOU

HAVE ADEQUATE HELP AND USE PROPER

LIFTING TECHNIQUES WHEN ASSEMBLING

KIT AND WHENEVER MOVING STOVE.

Refer to diagram and parts lists at back of this manual.

1. Remove parts from inside of carton. Parts

include: one damper collar (#1), two leg sets (#2),

one door/frame assembly (#3–17), and one hard-

ware pack (#7).

2. Stand barrel on end with plug facing up. Posi-

tion door between the large and small plugs

with the large plug at the 12 o’clock position.

NOTE: On 30 gallon barrels, use end without plugs

for mounting door.

3. Open the feed door and trace around the opening

using a scribe or marking pencil.

4. Open the slide draft and mark the bottom left corner

of the left side opening. Next mark the bottom right

corner of the right side opening.

5. Remove the door assembly from the barrel end.

Using a straight edge and marking tool, scribe a line

between the two marks representing the corners

of the slide draft. Next, scribe a line going up from

each corner mark until it intersects with the mark-

ings for the door opening.

materials required

(NOTE: The following items are NOT included with your stove)

access the inside of the barrel to attach leg assem-

blies. Center legs so barrel is stabilized and secure

legs to barrel.

9. Align damper/collar toward the rear of barrel. Using

a scribe or marking tool, trace the throat of the collar

onto the barrel top.

10. Cut the ﬂue pipe opening using a sabre saw or

reciprocating saw. De burr opening with metal ﬁle.

11. Reposition the damper collar over the newly created

opening. Mark and drill the mounting holes using a

1/4” bit. De burr opening with metal ﬁle. Attach the

damper collar using nuts and bolts provided with

kit.

Metal File

Drill: Hand or Electric

1/4” dia. Drill Bit

#2 Phillips Screwdriver

10mm Nut Driver or

Ratchet with 10mm Socket

(for Stove Bolts)

Safety Glasses

Safety Gloves

Pencil or scribe

6 foot Folding Rule or

Tape Measure

Sabre or Reciprocating Saw

with metal cutting blade

Tin Snips

Steel Barrel(s): Use only 30–55

gal. closed head-style steel

barrel(s).

Flooring Protection: Install on

non-combustible (soil or con-

crete) ﬂoor. Non-combustible

ﬂoor protection must be pro-

vided under any connector pipe

extending 2” on either side.

Chimney Connector Pipe:

round 6” dia. minimum 24

MSG black or 26 MSG blue

steel stove pipe (straight and/

or elbow(s) as required).

1/2” Sheet Metal Screws.

Chimney: Existing 6” Lined Ma-

sonry Chimney or 6” Inside Dia.

listed Type HT chimney.

Furnace Cement (manufacturer

recommends Rutland Code 78

or equivalent).

Fig. 1 – Cut opening in end of barrel, drill mounting

holes and install door assembly.

Double Barrel Stove Kit Model BK50E

1. After lower barrel has been assembled, place

adapter legs on top of bottom barrel. Mark holes,

drill and attach.

2. Place second barrel on top of lower barrel.

3. Align barrels, mark, drill and cut opening for damper

collar in the bottom of the top barrel to connect to

the damper/collar at rear of the lower barrel.

4. Attach damper collar to bottom of top barrel.

5. Align both barrels and place a piece of 6” blue/black

stove pipe between rear damper/collars of top and

bottom barrels.

6. Secure adapter legs

to top barrel.

7. On opposite (front)

end of top barrel,

mark, cut and attach

damper collar for

chimney connection

(ﬁg. 2).

Fig. 2 – Double Barrel

Stove Kit BK50E

6. Cut the opening for the door and draft using either

a sabre saw or a reciprocating saw with a metal

blade. De burr opening with metal ﬁle (ﬁg. 1).

7. Set the door frame assembly over the newly cre-

ated hole. Mark and drill the mounting holes using

a 1/4” bit. De burr opening with metal ﬁle. Attach the

assembly using nuts and bolts provided with kit.

8. With the door opening cut, you are now able to

NOTICE: Vogelzang International Corp. grants no warranty, stated or implied for the assembly, installation or

maintenance of your barrel stove kit and assumes no responsibility of any incidental or consequential damages.

1 2 3 4 5 6 7 8 9 ... 15 16

Comentarios a estos manuales

Sin comentarios

Vogelzang BK50E Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Horno Vogelzang BK50E